23.1.10. Raster terrain analysis

23.1.10.1. Aspect

Calculates the aspect of the Digital Terrain Model in input. The final aspect raster layer contains values from 0 to 360 that express the slope direction, starting from north (0°) and continuing clockwise.

Рис. 23.8 Aspect values

The following picture shows the aspect layer reclassified with a color ramp:

Рис. 23.9 Aspect layer reclassified

23.1.10.1.1. Parameters

Label	Имя	Тип	Описание
Elevation layer	INPUT	[raster]	Digital Terrain Model raster layer
Z factor	Z_FACTOR	[number] Default: 1.0	Vertical exaggeration. This parameter is useful when the Z units differ from the X and Y units, for example feet and meters. You can use this parameter to adjust for this. The default is 1 (no exaggeration).
Aspect	OUTPUT	[raster]	Specify the output aspect raster layer. One of: Save to a Temporary Layer (TEMPORARY_OUTPUT) Save to File… The file encoding can also be changed here.

23.1.10.1.2. Outputs

Label	Имя	Тип	Описание
Aspect	OUTPUT	[raster]	The output aspect raster layer

23.1.10.1.3. Python code

Algorithm ID: qgis:aspect

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Изпользование алгоритмов геообработки в консоли for details on how to run processing algorithms from the Python console.

23.1.10.2. Hillshade

Calculates the hillshade raster layer given an input Digital Terrain Model.

The shading of the layer is calculated according to the sun position: you have the options to change both the horizontal angle (azimuth) and the vertical angle (sun elevation) of the sun.

Рис. 23.10 Azimuth and vertical angle

The hillshade layer contains values from 0 (complete shadow) to 255 (complete sun). Hillshade is used usually to better understand the relief of the area.

Рис. 23.11 Hillshade layer with azimuth 300 and vertical angle 45

Particularly interesting is to give the hillshade layer a transparency value and overlap it with the elevation raster:

Рис. 23.12 Overlapping the hillshade with the elevation layer

23.1.10.2.1. Parameters

Label	Имя	Тип	Описание
Elevation layer	INPUT	[raster]	Digital Terrain Model raster layer
Z factor	Z_FACTOR	[number] Default: 1.0	Vertical exaggeration. This parameter is useful when the Z units differ from the X and Y units, for example feet and meters. You can use this parameter to adjust for this. Increasing the value of this parameter will exaggerate the final result (making it look more «hilly»). The default is 1 (no exaggeration).
Azimuth (horizontal angle)	AZIMUTH	[number] Default: 300.0	Set the horizontal angle (in degrees) of the sun (clockwise direction). Range: 0 to 360. 0 is north.
Vertical angle	V_ANGLE	[number] Default: 40.0	Set the vertical angle (in degrees) of the sun, that is the height of the sun. Values can go from 0 (minimum elevation) to 90 (maximum elevation).
Hillshade	OUTPUT	[raster]	Specify the output hillshade raster layer. One of: Save to a Temporary Layer (TEMPORARY_OUTPUT) Save to File… The file encoding can also be changed here.

23.1.10.2.2. Outputs

Label	Имя	Тип	Описание
Hillshade	OUTPUT	[raster]	The output hillshade raster layer

23.1.10.2.3. Python code

Algorithm ID: qgis:hillshade

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Изпользование алгоритмов геообработки в консоли for details on how to run processing algorithms from the Python console.

23.1.10.3. Hypsometric curves

Calculates hypsometric curves for an input Digital Elevation Model. Curves are produced as CSV files in an output folder specified by the user.

A hypsometric curve is a cumulative histogram of elevation values in a geographical area.

You can use hypsometric curves to detect differences in the landscape due to the geomorphology of the territory.

23.1.10.3.1. Parameters

Label	Имя	Тип	Описание
DEM to analyze	INPUT_DEM	[raster]	Digital Terrain Model raster layer to use for calculating altitudes
Boundary layer	BOUNDARY_LAYER	[vector: polygon]	Polygon vector layer with boundaries of areas used to calculate hypsometric curves
Step	STEP	[number] Default: 100.0	Vertical distance between curves
Use % of area instead of absolute value	USE_PERCENTAGE	[boolean] Default: False	Write area percentage to “Area” field of the CSV file instead of the absolute area
Hypsometric curves	OUTPUT_DIRECTORY	[folder]	Specify the output folder for the hypsometric curves. One of: Save to a Temporary Layer (TEMPORARY_OUTPUT) Save to File… The file encoding can also be changed here.

23.1.10.3.2. Outputs

Label	Имя	Тип	Описание
Hypsometric curves	OUTPUT_DIRECTORY	[folder]	Directory containing the files with the hypsometric curves. For each feature from the input vector layer, a CSV file with area and altitude values will be created. The file names start with histogram_, followed by layer name and feature ID.

23.1.10.3.3. Python code

Algorithm ID: qgis:hypsometriccurves

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Изпользование алгоритмов геообработки в консоли for details on how to run processing algorithms from the Python console.

23.1.10.4. Relief

Creates a shaded relief layer from digital elevation data. You can specify the relief color manually, or you can let the algorithm choose automatically all the relief classes.

Рис. 23.13 Relief layer

23.1.10.4.1. Parameters

Label	Имя	Тип	Описание
Elevation layer	INPUT	[raster]	Digital Terrain Model raster layer
Z factor	Z_FACTOR	[number] Default: 1.0	Vertical exaggeration. This parameter is useful when the Z units differ from the X and Y units, for example feet and meters. You can use this parameter to adjust for this. Increasing the value of this parameter will exaggerate the final result (making it look more «hilly»). The default is 1 (no exaggeration).
Generate relief classes automatically	AUTO_COLORS	[boolean] Default: False	If you check this option the algorithm will create all the relief color classes automatically
Relief colors Optional	COLORS	[table widget]	Use the table widget if you want to choose the relief colors manually. You can add as many color classes as you want: for each class you can choose the lower and upper bound and finally by clicking on the color row you can choose the color thanks to the color widget. Рис. 23.14 Manually setting of relief color classes The buttons in the right side panel give you the chance to: add or remove color classes, change the order of the color classes already defined, open an existing file with color classes and save the current classes as file.
Relief	OUTPUT	[raster] Default: [Save to temporary file]	Specify the output relief raster layer. One of: Save to a Temporary Layer (TEMPORARY_OUTPUT) Save to File… The file encoding can also be changed here.
Frequency distribution	FREQUENCY_DISTRIBUTION	[table] Default: [Skip output]	Specify the CSV table for the output frequency distribution. One of: Skip Output Save to a Temporary Layer (TEMPORARY_OUTPUT) Save to File… The file encoding can also be changed here.

23.1.10.4.2. Outputs

Label	Имя	Тип	Описание
Relief	OUTPUT	[raster]	The output relief raster layer
Frequency distribution	OUTPUT	[table]	The output frequency distribution

23.1.10.4.3. Python code

Algorithm ID: qgis:relief

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Изпользование алгоритмов геообработки в консоли for details on how to run processing algorithms from the Python console.

23.1.10.5. Ruggedness index

Calculates the quantitative measurement of terrain heterogeneity described by Riley et al. (1999). It is calculated for every location, by summarizing the change in elevation within the 3x3 pixel grid.

Each pixel contains the difference in elevation from a center cell and the 8 cells surrounding it.

Рис. 23.15 Ruggedness layer from low (red) to high values (green)

23.1.10.5.1. Parameters

Label	Имя	Тип	Описание
Elevation layer	INPUT	[raster]	Digital Terrain Model raster layer
Z factor	Z_FACTOR	[number] Default: 1.0	Vertical exaggeration. This parameter is useful when the Z units differ from the X and Y units, for example feet and meters. You can use this parameter to adjust for this. Increasing the value of this parameter will exaggerate the final result (making it look more rugged). The default is 1 (no exaggeration).
Ruggedness	OUTPUT	[raster] Default: [Save to temporary file]	Specify the output ruggedness raster layer. One of: Save to a Temporary Layer (TEMPORARY_OUTPUT) Save to File… The file encoding can also be changed here.

23.1.10.5.2. Outputs

Label	Имя	Тип	Описание
Ruggedness	OUTPUT	[raster]	The output ruggedness raster layer

23.1.10.5.3. Python code

Algorithm ID: qgis:ruggednessindex

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Изпользование алгоритмов геообработки в консоли for details on how to run processing algorithms from the Python console.

23.1.10.6. Slope

Calculates the slope from an input raster layer. The slope is the angle of inclination of the terrain and is expressed in degrees.

In the following picture you can see to the left the DTM layer with the elevation of the terrain while to the right the calculated slope:

Рис. 23.16 Flat areas in red, steep areas in blue

23.1.10.6.1. Parameters

Label	Имя	Тип	Описание
Elevation layer	INPUT	[raster]	Digital Terrain Model raster layer
Z factor	Z_FACTOR	[number] Default: 1.0	Vertical exaggeration. This parameter is useful when the Z units differ from the X and Y units, for example feet and meters. You can use this parameter to adjust for this. Increasing the value of this parameter will exaggerate the final result (making it steeper). The default is 1 (no exaggeration).
Slope	OUTPUT	[raster] Default: [Save to temporary file]	Specify the output slope raster layer. One of: Save to a Temporary Layer (TEMPORARY_OUTPUT) Save to File… The file encoding can also be changed here.

23.1.10.6.2. Outputs

Label	Имя	Тип	Описание
Slope	OUTPUT	[raster]	The output slope raster layer

23.1.10.6.3. Python code

Algorithm ID: qgis:slope

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Изпользование алгоритмов геообработки в консоли for details on how to run processing algorithms from the Python console.