3. Загрузка слоёв¶

The code snippets on this page need the following imports:

import os # This is is needed in the pyqgis console also
from qgis.core import (
    QgsVectorLayer
)

Векторные слои
Растровые слои
QgsProject instance

Давайте загрузим несколько слоёв с данными. В QGIS слои делятся на векторные и растровые. Кроме того, существуют пользовательские типы слоёв, но их обсуждение выходит за рамки этой книги.

3.1. Векторные слои ¶

To create and add a vector layer instance to the project, specify the layer’s data source identifier, name for the layer and provider’s name:

# get the path to the shapefile e.g. /home/project/data/ports.shp
path_to_airports_layer = "testdata/airports.shp"

# The format is:
# vlayer = QgsVectorLayer(data_source, layer_name, provider_name)

vlayer = QgsVectorLayer(path_to_airports_layer, "Airports layer", "ogr")
if not vlayer.isValid():
    print("Layer failed to load!")
else:
    QgsProject.instance().addMapLayer(vlayer)

Идентификатор источника данных это строка, специфичная для каждого провайдера векторных данных. Имя слоя используется в виджете списка слоёв. Необходимо проверять успешно ли завершилась загрузка слоя или нет. В случае каких-либо ошибок возвращается неправильный объект.

For a geopackage vector layer:

# get the path to a geopackage  e.g. /usr/share/qgis/resources/data/world_map.gpkg
path_to_gpkg = os.path.join(QgsApplication.pkgDataPath(), "resources", "data", "world_map.gpkg")
# append the layername part
gpkg_countries_layer = path_to_gpkg + "|layername=countries"
# e.g. gpkg_places_layer = "/usr/share/qgis/resources/data/world_map.gpkg|layername=countries"
vlayer = QgsVectorLayer(gpkg_countries_layer, "Countries layer", "ogr")
if not vlayer.isValid():
    print("Layer failed to load!")
else:
    QgsProject.instance().addMapLayer(vlayer)

The quickest way to open and display a vector layer in QGIS is the addVectorLayer() method of the QgisInterface:

vlayer = iface.addVectorLayer(path_to_airports_layer, "Airports layer", "ogr")
if not vlayer:
  print("Layer failed to load!")

This creates a new layer and adds it to the current QGIS project (making it appear in the layer list) in one step. The function returns the layer instance or None if the layer couldn’t be loaded.

Ниже показано как получить доступ к различным источникам данных используя провайдеры векторных данных:

OGR library (Shapefile and many other file formats) — data source is the path to the file:

for Shapefile:

vlayer = QgsVectorLayer("testdata/airports.shp", "layer_name_you_like", "ogr")
QgsProject.instance().addMapLayer(vlayer)

for dxf (note the internal options in data source uri):

uri = "testdata/sample.dxf|layername=entities|geometrytype=Polygon"
vlayer = QgsVectorLayer(uri, "layer_name_you_like", "ogr")
QgsProject.instance().addMapLayer(vlayer)

PostGIS database - data source is a string with all information needed to create a connection to PostgreSQL database.

QgsDataSourceUri class can generate this string for you. Note that QGIS has to be compiled with Postgres support, otherwise this provider isn’t available:

uri = QgsDataSourceUri()
# set host name, port, database name, username and password
uri.setConnection("localhost", "5432", "dbname", "johny", "xxx")
# set database schema, table name, geometry column and optionally
# subset (WHERE clause)
uri.setDataSource("public", "roads", "the_geom", "cityid = 2643", "primary_key_field")

vlayer = QgsVectorLayer(uri.uri(False), "layer name you like", "postgres")

Примечание

The False argument passed to uri.uri(False) prevents the expansion of the authentication configuration parameters, if you are not using any authentication configuration this argument does not make any difference.

CSV or other delimited text files — to open a file with a semicolon as a delimiter, with field «x» for X coordinate and field «y» for Y coordinate you would use something like this:
```
uri = "file://{}/testdata/delimited_xy.csv?delimiter={}&xField={}&yField={}".format(os.getcwd(), ";", "x", "y")
vlayer = QgsVectorLayer(uri, "layer name you like", "delimitedtext")
QgsProject.instance().addMapLayer(vlayer)
```
Примечание

The provider string is structured as a URL, so the path must be prefixed with file://. Also it allows WKT (well known text) formatted geometries as an alternative to x and y fields, and allows the coordinate reference system to be specified. For example:
```
uri = "file:///some/path/file.csv?delimiter={}&crs=epsg:4723&wktField={}".format(";", "shape")
```

GPX files — the «gpx» data provider reads tracks, routes and waypoints from gpx files. To open a file, the type (track/route/waypoint) needs to be specified as part of the url:
```
uri = "testdata/layers.gpx?type=track"
vlayer = QgsVectorLayer(uri, "layer name you like", "gpx")
QgsProject.instance().addMapLayer(vlayer)
```

SpatiaLite database — Similarly to PostGIS databases, QgsDataSourceUri can be used for generation of data source identifier:

uri = QgsDataSourceUri()
uri.setDatabase('/home/martin/test-2.3.sqlite')
schema = ''
table = 'Towns'
geom_column = 'Geometry'
uri.setDataSource(schema, table, geom_column)

display_name = 'Towns'
vlayer = QgsVectorLayer(uri.uri(), display_name, 'spatialite')
QgsProject.instance().addMapLayer(vlayer)

MySQL WKB-based geometries, through OGR — data source is the connection string to the table:

uri = "MySQL:dbname,host=localhost,port=3306,user=root,password=xxx|layername=my_table"
vlayer = QgsVectorLayer( uri, "my table", "ogr" )
QgsProject.instance().addMapLayer(vlayer)

WFS connection: the connection is defined with a URI and using the WFS provider:

uri = "https://demo.geo-solutions.it/geoserver/ows?service=WFS&version=1.1.0&request=GetFeature&typename=geosolutions:regioni"
vlayer = QgsVectorLayer(uri, "my wfs layer", "WFS")
QgsProject.instance().addMapLayer(vlayer)

The uri can be created using the standard urllib library:

import urllib

params = {
    'service': 'WFS',
    'version': '1.1.0',
    'request': 'GetFeature',
    'typename': 'geosolutions:regioni',
    'srsname': "EPSG:4326"
}
uri2 = 'https://demo.geo-solutions.it/geoserver/ows?' + urllib.parse.unquote(urllib.parse.urlencode(params))

Примечание

You can change the data source of an existing layer by calling setDataSource() on a QgsVectorLayer instance, as in the following example:

uri = "https://demo.geo-solutions.it/geoserver/ows?service=WFS&version=1.1.0&request=GetFeature&typename=geosolutions:regioni"
provider_options = QgsDataProvider.ProviderOptions()
# Use project's transform context
provider_options.transformContext = QgsProject.instance().transformContext()
vlayer.setDataSource(uri, "layer name you like", "WFS", provider_options)
QgsProject.instance().addMapLayer(vlayer)

3.2. Растровые слои ¶

For accessing raster files, GDAL library is used. It supports a wide range of file formats. In case you have troubles with opening some files, check whether your GDAL has support for the particular format (not all formats are available by default). To load a raster from a file, specify its filename and display name:

# get the path to a tif file  e.g. /home/project/data/srtm.tif
path_to_tif = "qgis-projects/python_cookbook/data/srtm.tif"
rlayer = QgsRasterLayer(path_to_tif, "SRTM layer name")
if not rlayer.isValid():
    print("Layer failed to load!")

To load a raster from a geopackage:

# get the path to a geopackage  e.g. /home/project/data/data.gpkg
path_to_gpkg = os.path.join(os.getcwd(), "testdata", "sublayers.gpkg")
# gpkg_raster_layer = "GPKG:/home/project/data/data.gpkg:srtm"
gpkg_raster_layer = "GPKG:" + path_to_gpkg + ":srtm"

rlayer = QgsRasterLayer(gpkg_raster_layer, "layer name you like", "gdal")

if not rlayer.isValid():
    print("Layer failed to load!")

Similarly to vector layers, raster layers can be loaded using the addRasterLayer function of the QgisInterface object:

iface.addRasterLayer(path_to_tif, "layer name you like")

This creates a new layer and adds it to the current project (making it appear in the layer list) in one step.

To load a PostGIS raster:

PostGIS rasters, similar to PostGIS vectors, can be added to a project using a URI string. It is efficient to create a dictionary of strings for the database connection parameters. The dictionary is then loaded into an empty URI, before adding the raster. Note that None should be used when it is desired to leave the parameter blank:

uri_config = {#
# a dictionary of database parameters
'dbname':'gis_db', # The PostgreSQL database to connect to.
'host':'localhost',     # The host IP address or localhost.
'port':'5432',          # The port to connect on.
'sslmode':'disable',    # The SSL/TLS mode. Options: allow, disable, prefer, require, verify-ca, verify-full
# user and password are not needed if stored in the authcfg or service
'user':None,            # The PostgreSQL user name, also accepts the new WFS provider naming.
'password':None,        # The PostgreSQL password for the user.
'service':None,         # The PostgreSQL service to be used for connection to the database.
'authcfg':'QconfigId',  # The QGIS athentication database ID holding connection details.
# table and raster column details
'schema':'public',      # The database schema that the table is located in.
'table':'my_rasters',   # The database table to be loaded.
'column':'rast',        # raster column in PostGIS table
'mode':'2',             # GDAL 'mode' parameter, 2 union raster tiles, 1 separate tiles (may require user input)
'sql':None,             # An SQL WHERE clause.
'key':None,             # A key column from the table.
'srid':None,            # A string designating the SRID of the coordinate reference system.
'estimatedmetadata':'False', # A boolean value telling if the metadata is estimated.
'type':None,            # A WKT string designating the WKB Type.
'selectatid':None,      # Set to True to disable selection by feature ID.
'options':None,         # other PostgreSQL connection options not in this list.
'connect_timeout':None,
'hostaddr':None,
'driver':None,
'tty':None,
'requiressl':None,
'krbsrvname':None,
'gsslib':None,
}
# configure the URI string with the dictionary
uri = QgsDataSourceUri()
for param in uri_config:
    if (uri_config[param] != None):
        uri.setParam(param, uri_config[param]) # add parameters to the URI

# the raster can now be loaded into the project using the URI string and GDAL data provider
rlayer = iface.addRasterLayer('PG: ' + uri.uri(False), "raster layer name", "gdal")

Raster layers can also be created from a WCS service:

layer_name = 'nurc:mosaic'
uri = "https://demo.geo-solutions.it/geoserver/ows?identifier={}".format(layer_name)
rlayer = QgsRasterLayer(uri, 'my wcs layer', 'wcs')

Here is a description of the parameters that the WCS URI can contain:

WCS URI is composed of key=value pairs separated by &. It is the same format like query string in URL, encoded the same way. QgsDataSourceUri should be used to construct the URI to ensure that special characters are encoded properly.

url (required) : WCS Server URL. Do not use VERSION in URL, because each version of WCS is using different parameter name for GetCapabilities version, see param version.
identifier (required) : Coverage name
time (optional) : time position or time period (beginPosition/endPosition[/timeResolution])
format (optional) : Supported format name. Default is the first supported format with tif in name or the first supported format.
crs (optional) : CRS in form AUTHORITY:ID, e.g. EPSG:4326. Default is EPSG:4326 if supported or the first supported CRS.
username (optional) : Username for basic authentication.
password (optional) : Password for basic authentication.
IgnoreGetMapUrl (optional, hack) : If specified (set to 1), ignore GetCoverage URL advertised by GetCapabilities. May be necessary if a server is not configured properly.
InvertAxisOrientation (optional, hack) : If specified (set to 1), switch axis in GetCoverage request. May be necessary for geographic CRS if a server is using wrong axis order.
IgnoreAxisOrientation (optional, hack) : If specified (set to 1), do not invert axis orientation according to WCS standard for geographic CRS.
cache (optional) : cache load control, as described in QNetworkRequest::CacheLoadControl, but request is resend as PreferCache if failed with AlwaysCache. Allowed values: AlwaysCache, PreferCache, PreferNetwork, AlwaysNetwork. Default is AlwaysCache.

Alternatively you can load a raster layer from WMS server. However currently it’s not possible to access GetCapabilities response from API — you have to know what layers you want:

urlWithParams = "crs=EPSG:4326&format=image/png&layers=tasmania&styles&url=https://demo.geo-solutions.it/geoserver/ows"
rlayer = QgsRasterLayer(urlWithParams, 'some layer name', 'wms')
if not rlayer.isValid():
  print("Layer failed to load!")

3.3. QgsProject instance ¶

If you would like to use the opened layers for rendering, do not forget to add them to the QgsProject instance. The QgsProject instance takes ownership of layers and they can be later accessed from any part of the application by their unique ID. When the layer is removed from the project, it gets deleted, too. Layers can be removed by the user in the QGIS interface, or via Python using the removeMapLayer() method.

Adding a layer to the current project is done using the addMapLayer() method:

QgsProject.instance().addMapLayer(rlayer)

To add a layer at an absolute position:

# first add the layer without showing it
QgsProject.instance().addMapLayer(rlayer, False)
# obtain the layer tree of the top-level group in the project
layerTree = iface.layerTreeCanvasBridge().rootGroup()
# the position is a number starting from 0, with -1 an alias for the end
layerTree.insertChildNode(-1, QgsLayerTreeLayer(rlayer))

If you want to delete the layer use the removeMapLayer() method:

# QgsProject.instance().removeMapLayer(layer_id)
QgsProject.instance().removeMapLayer(rlayer.id())

In the above code, the layer id is passed (you can get it calling the id() method of the layer), but you can also pass the layer object itself.

For a list of loaded layers and layer ids, use the mapLayers() method:

QgsProject.instance().mapLayers()

3. Загрузка слоёв¶

3.1. Векторные слои¶

3.2. Растровые слои¶

3.3. QgsProject instance¶

3.1. Векторные слои ¶

3.2. Растровые слои ¶

3.3. QgsProject instance ¶