eVis プラグイン¶

イベントブラウザモジュールを起動する¶

To launch the Event Browser module, click on Database ‣ eVis ‣ eVis Event Browser. This will open the Generic Event Browser window.

The Event Browser window has three tabs displayed at the top of the window. The Display tab is used to view the photograph and its associated attribute data. The Options tab provides a number of settings that can be adjusted to control the behavior of the eVis plugin. Lastly, the Configure External Applications tab is used to maintain a table of file extensions and their associated application to allow eVis to display documents other than images.

ディスプレイウィンドウを理解する¶

To see the Display window, click on the Display tab in the Event Browser window. The Display window is used to view geocoded photographs and their associated attribute data.

Figure eVis 1:

*eVis*表示ウィンドウ

1. ディスプレイウィンドウ:フォトを表示する場所のウィンドウ。

2. ズームインボタン: さらに詳細を見るためズームインを行います. ディスプレイウィンドウにイメージ全体を表示できない場合,左と下部にスクロールバーが表示されイメージをパンすることができます.

3. ズームアウトボタン: もっと広い領域を見るためにズームアウトします.

4. 全領域にズーム ボタン: 写真の全領域えお表示します.

5. Attribute information window: All of the attribute information for the point associated with the photograph being viewed is displayed here. If the file type being referenced in the displayed record is not an image but is of a file type defined in the Configure External Applications tab, then when you double-click on the value of the field containing the path to the file, the application to open the file will be launched to view or hear the contents of the file. If the file extension is recognized, the attribute data will be displayed in green.

6. ナビゲーションボタン: 前ボタンと次ボタンは1個以上の地物が選択されている場合前と後の地物をロードする場合に利用されます.

オプションウィンドウを理解する¶

Figure eVis 2:

*eVis*オプションウィンドウ

1. File path: A drop-down list to specify the attribute field that contains the directory path or URL for the photographs or other documents being displayed. If the location is a relative path, then the checkbox must be clicked. The base path for a relative path can be entered in the Base Path text box below. Information about the different options for specifying the file location are noted in the section 写真の場所と名前を指定します below.
2. Compass bearing: A drop-down list to specify the attribute field that contains the compass bearing associated with the photograph being displayed. If compass bearing information is available, it is necessary to click the checkbox below the drop-down menu title.
3. Compass offset: Compass offsets can be used to compensate for declination (to adjust bearings collected using magnetic bearings to true north bearings). Click the Manual radio button to enter the offset in the text box or click the From Attribute radio button to select the attribute field containing the offsets. For both of these options, east declinations should be entered using positive values, and west declinations should use negative values.
4. Directory base path: The base path onto which the relative path defined in Figure_eVis_2 (A) will be appended.
5. Replace path: If this checkbox is checked, only the file name from A will be appended to the base path.
6. Apply rule to all documents: If checked, the same path rules that are defined for photographs will be used for non-image documents such as movies, text documents, and sound files. If not checked, the path rules will only apply to photographs, and other documents will ignore the base path parameter.
7. Remember settings: If the checkbox is checked, the values for the associated parameters will be saved for the next session when the window is closed or when the [Save] button below is pressed.

8. 値のリセット: この業の値をリセットし、デフォルト設定に戻します。

9. Restore defaults: This will reset all of the fields to their default settings. It has the same effect as clicking all of the [Reset] buttons.

10. Save: この機能を使うと設定を Options ペインを閉じないで保存します.

外部アプリケーションの設定を理解する¶

Figure eVis 3:

The eVis External Applications window

1. File reference table: A table containing file types that can be opened using eVis. Each file type needs a file extension and the path to an application that can open that type of file. This provides the capability of opening a broad range of files such as movies, sound recordings, and text documents instead of only images.

2. 新しいファイルタイプの追加*: 新しいファイルタイプをユニークなファイル拡張子と開くためのアプリケーションのパスと一緒に追加して下さい.

3. Delete current row: Delete the file type highlighted in the table and defined by a file extension and a path to an associated application.

イベントIDモジュールを実行する¶

To launch the ‘Event ID’ module, either click on the ^{Event ID} icon or click on Database ‣ eVis ‣ Event ID Tool. This will cause the cursor to change to an arrow with an ‘i’ on top of it signifying that the ID tool is active.

To view the photographs linked to vector features in the active vector layer displayed in the QGIS map window, move the Event ID cursor over the feature and then click the mouse. After clicking on the feature, the Event Browser window is opened and the photographs on or near the clicked locality are available for display in the browser. If more than one photograph is available, you can cycle through the different features using the [Previous] and [Next] buttons. The other controls are described in the ref:evis_browser section of this guide.

データベース接続モジュールを実行する¶

To launch the ‘Database Connection’ module, either click on the appropriate icon ^{eVis Database Connection} or click on Database ‣ eVis ‣ Database Connection. This will launch the Database Connection window. The window has three tabs: Predefined Queries, Database Connection, and SQL Query. The Output Console window at the bottom of the window displays the status of actions initiated by the different sections of this module.

データベースとの接続¶

Click on the Database Connection tab to open the database connection interface. Next, use the Database Type combo box to select the type of database that you want to connect to. If a password or username is required, that information can be entered in the Username and Password textboxes.

Enter the database host in the Database Host textbox. This option is not available if you selected ‘MS Access’ as the database type. If the database resides on your desktop, you should enter “localhost”.

Enter the name of the database in the Database Name textbox. If you selected ‘ODBC’ as the database type, you need to enter the data source name.

When all of the parameters are filled in, click on the [Connect] button. If the connection is successful, a message will be written in the Output Console window stating that the connection was established. If a connection was not established, you will need to check that the correct parameters were entered above.

Figure eVis 4:

eVis データベースコネクションウィンドウ

1. データベースタイプ: 使用するデータベースの種類を特定するためのドロップダウンリスト

2. データベースホスト: データベースホストの名称

3. ポート: MySQL または PostgreSQLデータベースのタイプを選択した場合のポート番号

4. データベース名称: データベースの名称

5. 接続：上で定義したパラメータを使ってデータベースに接続するボタン

6. 出力コンソール：処理に関連するメッセージが表示されたコンソールウィンドウ

7. ユーザ名:データベースがパスワードで保護されている場合使用するユーザ名

8. パスワード:データベースがパスワードで保護されている場合に使用するパスワード

9. 定義済クエリ: “定義済クエリ” ウィンドウを表示するタブ

10. データベース接続: “データベース接続”ウィンドウを表示するタブ

11. SQL クエリ: “SQLクエリ”ウィンドウを表示するタブ

12. ヘルプ:オンラインヘルプを表示する

13. OK: メインの “データベース接続”ウィンドウを閉じる

SQLクエリの実行¶

SQL queries are used to extract information from a database or ODBC resource. In eVis, the output from these queries is a vector layer added to the QGIS map window. Click on the SQL Query tab to display the SQL query interface. SQL commands can be entered in this text window. A helpful tutorial on SQL commands is available at http://www.w3schools.com/sql. For example, to extract all of the data from a worksheet in an Excel file, select * from [sheet1$] where sheet1 is the name of the worksheet.

Click on the [Run Query] button to execute the command. If the query is successful, a Database File Selection window will be displayed. If the query is not successful, an error message will appear in the Output Console window.

In the Database File Selection window, enter the name of the layer that will be created from the results of the query in the Name of New Layer textbox.

Figure eVis 5:

eVis SQLクエリタブ

1. SQLクエリテキストウィンドウ: SQLクエリをタイプするためのスクリーン

2. クエリ実行: SQL クエリウィンドウ で入力したクエリを実行するためのボタン

3. コンソールウィンドウ：処理に関連するメッセージが表示されたコンソールウィンドウ

4. ヘルプ:オンラインヘルプを表示する

5. OK: メインの :guilabel: “データベース接続”ウィンドウを閉じる

Use the X Coordinate and Y Coordinate combo boxes to select the fields from the database that stores the X (or longitude) and Y (or latitude) coordinates. Clicking on the [OK] button causes the vector layer created from the SQL query to be displayed in the QGIS map window.

To save this vector file for future use, you can use the QGIS ‘Save as...’ command that is accessed by right-clicking on the layer name in the QGIS map legend and then selecting ‘Save as...’

定義済クエリの実行¶

With predefined queries, you can select previously written queries stored in XML format in a file. This is particularly helpful if you are not familiar with SQL commands. Click on the Predefined Queries tab to display the predefined query interface.

To load a set of predefined queries, click on the ^{Open File} icon. This opens the Open File window, which is used to locate the file containing the SQL queries. When the queries are loaded, their titles as defined in the XML file will appear in the drop-down menu located just below the ^{Open File} icon. The full description of the query is displayed in the text window under the drop-down menu.

Select the query you want to run from the drop-down menu and then click on the SQL Query tab to see that the query has been loaded into the query window. If it is the first time you are running a predefined query or are switching databases, you need to be sure to connect to the database.

Click on the [Run Query] button in the SQL Query tab to execute the command. If the query is successful, a Database File Selection window will be displayed. If the query is not successful, an error message will appear in the Output Console window.

Figure eVis 6:

*eVis*定義済クエリタブ

1. Open File: Launches the “Open File” file browser to search for the XML file holding the predefined queries.

2. 定義済クエリ: 定義済クエリのXMLファイルによって定義されたクエリすべてのドロップダウンリスト

3. クエリ説明: クエリの短い説明文。この説明は定義済クエリのXMLファイルに由来します。

4. コンソールウィンドウ：処理に関連するメッセージが表示されたコンソールウィンドウ

5. ヘルプ:オンラインヘルプを表示する

6. OK: メインの “データベース接続”ウィンドウを閉じる

eVis定義済クエリのXMLフォーマット¶

eVisで読み込まれるXMLタグ

３つのクエリを含む XML ファイルの完全なサンプルは下に表示されています.

<?xml version="1.0"?>
<doc>
 <query>
   <shortdescription>Import all photograph points</shortdescription>
   <description>This command will import all of the data in the SQLite database to QGIS
      </description>
   <databasetype>SQLITE</databasetype>
   <databasehost />
   <databaseport />
   <databasename>C:\textbackslash Workshop/textbackslash
eVis\_Data\textbackslash PhotoPoints.db</databasename>
   <databaseusername />
   <databasepassword />
   <sqlstatement>SELECT Attributes.*, Points.x, Points.y FROM Attributes LEFT JOIN
      Points ON Points.rec_id=Attributes.point_ID</sqlstatement>
   <autoconnect>false</autoconnect>
 </query>
  <query>
   <shortdescription>Import photograph points "looking across Valley"</shortdescription>
   <description>This command will import only points that have photographs "looking across
      a valley" to QGIS</description>
   <databasetype>SQLITE</databasetype>
   <databasehost />
   <databaseport />
   <databasename>C:\Workshop\eVis_Data\PhotoPoints.db</databasename>
   <databaseusername />
   <databasepassword />
   <sqlstatement>SELECT Attributes.*, Points.x, Points.y FROM Attributes LEFT JOIN
      Points ON Points.rec_id=Attributes.point_ID where COMMENTS='Looking across
      valley'</sqlstatement>
   <autoconnect>false</autoconnect>
 </query>
 <query>
   <shortdescription>Import photograph points that mention "limestone"</shortdescription>
   <description>This command will import only points that have photographs that mention
      "limestone" to QGIS</description>
   <databasetype>SQLITE</databasetype>
   <databasehost />
   <databaseport />
   <databasename>C:\Workshop\eVis_Data\PhotoPoints.db</databasename>
   <databaseusername />
   <databasepassword />
   <sqlstatement>SELECT Attributes.*, Points.x, Points.y FROM Attributes LEFT JOIN
      Points ON Points.rec_id=Attributes.point_ID where COMMENTS like '%limestone%'
      </sqlstatement>
   <autoconnect>false</autoconnect>
 </query>
</doc>